Model Number: DKG509-#7841 Brand Name: DKG Key Specifications/Special Features: Generator voltage 1: L1-N, L2-N, L3-NGenerator voltage 2: L1-L2, L2-L3, L3-L1Generator current: L1, L2, L3Generator KW: L1, L2, L3, totalGenerator PF: L1, L2, L3, total

Generator frequency:

• Engine rpm
• Mains voltage: L1-N, L2-N, L3-N
• Mains voltage: L1-L2, L2-L3, L3-L1
• Mains frequency:
• Battery voltage
• Engine coolant temperature
• Engine oil pressure
• Fuel level
• Engine oil temperature

Technical specifications:

• Alternator voltage: 0 to 300 V-AC (Ph-N)
• Alternator frequency: 0-100Hz
• Mains voltage: 0 to 300V AC (Ph-N)
• Mains frequency: 0-100Hz
• DC supply range: 9.0 to 33.0V DC
• Cranking dropouts: survives 0 V for 100ms
• Typical standby current: 100mA DC
• Maximum operating current: 200mA DC (relay outputs open)
• Generator/mains contactor relay output: 16A/250V
• DC output: 10A at 28V
• Charge excitation: minimum 2W
• Magnetic pickup input: 0.5-30V AC
• Magnetic pickup frequency: 10kHz maximum
• Current input: from CTs/5A
• Maximum load weight: 0.7VA per phase
• Analog input range: 0-5000 ohms
• Serial port: RS-232, 9600 bauds, no parity, 1 bit stop
• (F)°C (158°F) to 70°C (-4°operating temperature: -20F)°C (176°F) to 80°C (storage temperature: -40°C)
• Maximum humidity: 95% non-condensing
• Dimensions: 200 x 148 x 46mm
• Panel cut-out dimensions: 176x121mm minimum
• Weight: 450g (approximately)
• Case material: high temperature ABS/PC (UL94-V0)
• IP Protection: IP65 from front panel, IP30 from the rear

CE conformity reference standards:

• EN 61010 (safety requirements)
• EN 61326 (EMC requirements)
• UL/CSA conformity: certification # 20110527-E314374
• UL 508, edition 17
• UL 2200, 1st edition
• UL 840 edition 3
• CSA C22.2 number 14, edition 10